There are different kinds of scales used in different sectors of life, some are smaller scales such as kitchen scales or bathroom scales and others are larger scales such as industrial floor scales, etc. The larger scales like industrial scales are used for weighing huge weights; these weights are normally in tons. Most typical industrial scales easily show weights starting from one ton up to twenty tons of weights (that is almost 40,000 pounds of weight). With such large measurement, reliability and accuracy can be an issue. So, whenever you are going to buy any of the industrial scales, you have to take care of some minor issues.

Before getting these scales, you must analyze your requirements and take care of weighing capacity, sizes and types of the scale. The weighing capacity for industries matter a lot because every industry has different weighing requirements in different seasons. Similarly, industries face many ups and downs during course of their operations and they grow with passage of time. Hence their weighing requirements change with seasons and different phases of growth, so before buying industrial scales, an industrialist must take care of seasonal weighing needs, market demand trends and his industry growth in order to meet any kind of requirements regarding load measurements.

Similarly, size of the floor scaling is generally an issue; you do not want to end up having either too small scale that you are unable to put your loads properly on it or too large scale that it covers up your entire room. Industrial floor scaling just has two shapes, i.e. a square or a rectangle, most of the industries prefer a square scale but the shape is mostly dependent on the weighing requirements. The sizes of the scales range from three by three to ten by ten feet. These scales are generally up to 5 inches higher from the floor and can be lowered if required. For putting the loads on the scales, slides and dollyings are available which make the loading and unloading of the weights much easier and quicker. Sometimes the scales are fixed with ramps on their sides; these ramps are also for facilitating the loads. You can wheel very heavy weights easily with the help of these ramps.

The alternatives to floor scaling are jacks and forklifts. But when it comes down to liquid substances or chemicals there is no alternative to these scales. Jacks and forklifts are used for measuring very heavy loads and solid products and mostly are used in warehouses or manufacturing units of the industry. Floor scaling is not much used at such places because of the fact that it is fixed at one place and you cannot move it to different locations. Industrial scales are critical in the chemicals industry because the liquid substances cannot be measured accurately until and unless they are settled down and they are settled properly on Floor Scales only. If you try to measure them before settling them, your load would be inaccurately measured and you won't be able to rely on them.

New-ticket Create new ticket

Create your profile

Help contribute to this project by taking a few moments to create your personal profile. Create your profile »


Shared Ticket Bins